RF GFS SW2.4-safe

  • Set consisting of:
    Foot switch 1-pedal with protective shield
    and charging device,
    Wireless receiver / RF RxT SW2.4-safe >
    with magnetic base antenna
    and pairing cable

Technical data

RF GFS SW2.4-safe
Applied standards EN 60947-5-1, EN 61000-6-2, EN 62061, EN 61326-3-1, EN ISO 13849-1, EN 61784-3, EN 300 328, EN 301 489-1/-17, EN 60950-1, EN 50371
Enclosure aluminium die-cast, powder-coated
Degree of protection IP 67 to IEC/EN 60529
Protocol sWave®
Frequency 2.4 - 2.4835 GHz
Transmission power 3.15 mW
Voltage supply rechargeable lithium-ion battery
Nominal voltage 3.7 V
Nominal capacity 2.25 Ah
Charging device 7,5 V/800 mA; ODU-connector
Battery life after 300 charging cycles 80 % battery capacity
Safety-relevant data:
EN ISO 13849-1 Performance Level PL d
Category 2
B10d (10 % load) 20 million
TM max. 20 years
MTTFd electronic 216 years
MTTFd 119 years
DC/DCavg 84 %
PFHd 5.28 x 10-7 1/h
nop 378
Transmission interval < 50 ms
Synchronisation after sleep mode max. 8 s
Current consumption active: approx. 35 mA
sniff mode: approx. 12 mA
sleep mode: approx. 1 mA
Ambient temperature charging 0 °C … +40 °C
Ambient temperature –20 °C … +55 °C
Storage and shipping temperature –20 °C … +60 °C
Mechanical life > 1 million operations
Wireless range max. 15 m inside
Wireless approvals Europe: RED 2014/53/EU
USA: FCC-Id. T7V-BC06
Canada: IC 216Q-BC06
Japan: ARIB STD-T66
Approvals TÜV Nord
Technical data
RF RxT SW2.4-safe
see separate data sheet of / RF RxT SW2.4-safe >

Ordering details

Type   Material no.  
Type    Material no.   
RF GFS 2S SW2.4-safe / RF RxT SW2.4-safe (SET) 1329078

Accessories

RF CAN Extension Board 4W
  • Extension of RF RxT SW2.4-safe 24 VDC
  • 4 potential-free relay outputs
  • 4 change-over contacts, max. 6 A
  • LEDs for indication of switching state
  • CAN communication
RF SMA antenna socket 0.5 m
  • Suitable for antennae with SMA plug-in connector
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
Power supply 24V DC
  • Push-in terminals