RF Rx SW868-4S 48V

Applied standards

EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2

Enclosure

thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0

Degree of protection

IP20 (IEC/EN 60529)

Number of channels

4

Mounting

DIN rail mounting

Connection

screw connection terminals 0.14 mm² - 2,5 mm², stripping length 8 mm

Inputs

2 additional push buttons (SEL, LRN)

Outputs

4 potential-free normally open contacts (optoelectronic photo relays)

Rated operating voltage range U_B

12...48 VDC (-10 % ... +25 %, abs. max. 60 V)

Rated operating current I_e

48 VDC: max. 16 mA
24 VDC: max. 21 mA

Current absorption

at 48 VDC:
typ. 1.9 mA (standby current)
typ. 8 mA (1 output switched)
typ. 8 mA (2 outputs switched)
typ. 9 mA (3 outputs switched)
typ. 10 mA (4 outputs switched)

Rated operating voltage U_e

48 VDC

Rated operating current/voltage I_e/U_e

output contacts: 0.5 A / 48 VDC (abs. max. 60 V)

Utilisation category

DC-13

Display

green LED: ready for operation,
orange LED: signalling of switching state

Operation cycles

max. 12000 telegrams with repetitions/h

Degree of pollution

2

Ambient temperature

0 °C … +55 °C

Storage and shipping temperature

–25 °C … +85 °C

Notes

Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Switching contacts are not suitable for capacitive loads.

Wireless approvals

Europe: RED 2014/53/EU

Protocol

sWave®

Frequency

868.3 MHz (Europe)

Transmission power

< 25 mW

Data rate

66 kbps

Channel bandwidth

480 kHz

Wireless range

max. 700 m outdoors, max. 50 m indoors