Wireless pull-wire switch
RF 95 WH/90° LR SW868 - 3.2 m nylon pull-wire with rubber ball
Article no.: 1208145 Old article no.: 95914010
contact usProduct features
Thermoplastic enclosure
Mounting details to EN 50047
Including 3.2 m long pull-wire and ball
sWave® wireless technology
No power supply, no wiring and pipe laying required
Easy programming of receiver
Output signal can be individually configured at the receiver
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Cover
thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Tightening torque
enclosure mounting screws: 1.2 … 1.3 Nm
cover screws: 0.5 … 0.6 Nm
Degree of protection
IP67 (IEC/EN 60529)
Voltage source
electrodynamic energy generator
Ambient temperature
–20 °C … +65 °C
Operation cycles
max. 12000 telegrams with repetitions/h
Mechanical life
> 1 million operations
Actuating time
min. 80 ms
Notes
no status signal available
Wireless approvals
Europe: RED 2014/53/EU
Weight
140 g
Wireless technology
Protocol
sWave®
Frequency
868.3 MHz (Europe)
Transmission power
< 25 mW
Data rate
66 kbps
Channel bandwidth
480 kHz
Wireless range
max. 450 m outdoors, max. 40 m indoors
Downloads
Wireless pull-wire switch
RF 95 WH/90° LR SW868 - 3.2 m nylon pull-wire with rubber ballArticle no.: 1208145 Old article no.: 95914010
contact us