RF RC M30 SW922 KST LBT

Wireless magnetic sensor
Material number: 1372330
  • Thermoplastic enclosure
  • sWave® wireless technology
  • Power supply by Lithium battery
  • No wiring and pipe laying required
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
  • LBT - Listen before Talk Software
Notes
  • 2 mounting nuts are included in delivery
  • The actuator is not included in the delivery of the switches
Contact

Technical data

Applied standards EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 61000-4-20, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure PVC-C
Tightening torque mounting nut: max. 4 Nm
Degree of protection IP 67 to IEC/EN 60529
Protocol sWave®
Frequency 916.5 MHz (Japan)
Transmission power < 1 mW
Data rate 66 kbps
Channel bandwidth 520 kHz
Voltage supply lithium battery CR 2032 (replaceable)
System Lithium-MnO2
Nominal voltage 3 V
Nominal capacity 0.23 Ah
Battery life approx. 10 years unused, approx. 6 years with 1 actuation per min.
Type of installation flush, in not ferromagnetic material
Ambient temperature –25 °C … +65 °C
Switching system Reed contact
Switching distances M 100: sn = 15 mm;
M 30 Niro: sn = 30 mm
Hysteresis approx. 1 mm
Operation cycles max. 1440 telegrams with repetitions/h
Current absorption without transmissions: approx. 1 μA
Wireless range max. 150 m outside,
max. 20 m inside
Mechanical life > 1 million operations
Actuating time min. 80 ms
Note status signal configurable ex works; transmission of battery voltage
Wireless approvals Japan: ARIB STD-T108: 204-610002