Product features
Corrosion-resistant aluminium enclosure
Screws made of stainless steel
sWave® wireless technology
With protective shield
Ergonomic pedal design and wide opening in protective shield
No power supply, no wiring and pipe laying required
Easy programming of receiver
Output signal can be individually configured at the receiver
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
aluminium die-cast, corrosion-resistant, powder-coated, passivated, anthracite grey, similar to RAL 7016
Pedal
aluminium die-cast, corrosion-resistant, hard-coated, powder-coated, anthracite grey, similar to RAL 7016
Protective shield
aluminium die-cast, corrosion-resistant, powder-coated, passivated, signal yellow, similar to RAL 1003
Degree of protection
IP67 (IEC/EN 60529)
Voltage source
electrodynamic energy generator
Ambient temperature
–20 °C … +65 °C
Operation cycles
max. 12000 telegrams with repetitions/h
Mechanical life
> 1 million operations
Actuating time
min. 80 ms
Notes
no status signal available
Wireless approvals
Europe: RED 2014/53/EU
Weight
1200 g
Wireless technology
Protocol
sWave®
Frequency
868.3 MHz (Europe)
Transmission power
< 25 mW
Data rate
66 kbps
Channel bandwidth
480 kHz
Wireless range
max. 450 m outdoors, max. 40 m indoors