Position switch with safety function
ES 41 1Ö/1S +180°C Extreme
Article no.: 1046259 Old article no.: 41001905
contact usProduct features
Metal enclosure
2 contacts
3 cable entries M16 x 1.5
Heat-resistant up to +180 °C
Locking screws, brass nickel-plated
Actuator: Plunger
Actuating speed max. 0.5 m/s with a vertical actuating angle of 20°
Vertical actuation or actuation from side possible
Actuator with captive stainless steel ball
Exact repeatability of switching point
Attention: Please state required international approvals with your order!
Notes
When used as safety switch, secure the enclosure against slipping with appropriate means, e.g. pinning.
Technical data
General technical data
Applied standards
EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
Enclosure
aluminium die-cast, powder-coated
Cover
steel, powder-coated
Switch type
type 1
Coding level
no coding
Degree of protection
IP65 (IEC/EN 60529)
B10d (10 % load)
2 million
TM
max. 20 years
Contact material
silver
Switching system
slow action, positive break NC contacts A
Switching elements
1 NC/1 NO contact, type Za
Connection
screw connection terminals
Cable cross-section
max. 2.5 mm² (incl. conductor ferrules)
Cable entry
3 x M16 x 1.5
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
400 V
Conventional thermal current Ithe
6 A
Utilisation category
AC-15
Rated operating current/voltage Ie/Ue
6 A/400 VAC
Short-circuit protection
6 A gG/gN fuse
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Ambient temperature
–20 °C … +180 °C
Approvals
d ]
Weight
160 g
Downloads
Variants / Options
The following variants / options are available on request:
- Connector M12 x 1, 4-pole
Position switch with safety function
ES 41 1Ö/1S +180°C ExtremeArticle no.: 1046259 Old article no.: 41001905
contact us