RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
Ex 355 AZ
- Ex zone 1 and 21
- Metal enclosure
- Mounting details to EN 50041
- Wiring compartment
- Actuator head can be repositioned in factory by 4 x 90°
- Special version only for dust Ex zone 22 available
Note
- The actuator is not included in the delivery of the switches
Technical data
| Applied standards | EN 60947-5-1, EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-31, EN ISO 13849-1, EN ISO 14119 |
|---|---|
| Enclosure | zinc die-cast, enamel finish |
| Actuator | stainless steel 1.4301 |
| Switch type | type 2 |
| Coding level | low coding |
| Degree of protection | IP 67 to IEC/EN 60529 |
| B10d (10 % load) | 2 million |
| TM | max. 20 years |
| Switch insert | 1 x Ex 95 |
| Contact material | silver |
| Switching system | slow action, positive break NC contacts  |
| Switching elements | 1 NC/1 NO contact or 2 NC contacts, type Zb |
| Connection | screw connection terminals |
| Cable cross-section | max. 1.5 mm² (incl. conductor ferrules) |
| Cable entry | 3 x M20 x 1.5 |
| Clamping range | 7 … 12 mm |
| Rated impulse withstand voltage Uimp | 4 kV |
| Rated insulation voltage Ui | 250 V |
| Conventional thermal current Ithe | 6 A |
| Rated operating current/voltage Ie/Ue | 6 A/250 VAC; 0.25 A/230 VDC |
| Utilisation category | AC-15; DC-13 |
| Short-circuit protection | 6 A gG/gN fuse |
| Positive break travel | 8.3 mm |
| Ambient temperature | T6: –20 °C … +40 °C; T5: –20 °C … +60 °C |
| Mechanical life | > 1 million operations |
| Impact energy | max. 7 J |
| Ex marking |  II 2G Ex db e IIC T6/T5 Gb, II 2D Ex tb IIICT80 °C/T95 °C Db IECEx Ex db e IIC T6/T5 Gb, Ex tb IIIC T80 °C/T95 °C Db |
| Approvals | BVS 04 ATEX E 126 IECEx BVS 07.0013 |
