RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
Ex ZS 90 S
- Ex zone 1 and 21
- Thermoplastic enclosure
- 4 contacts
- Wire length up to 2 x 50 m
- Release by lever
- Wire pull and breakage detection
- Attention: Please state required international approvals with your order!
Technical data
| Applied standards | EN 60947-5-1, EN 60079-0, EN 60079-1, EN 60079-31, EN ISO 13850, EN ISO 13849-1 |
|---|---|
| Enclosure | thermoset, UV resistant to EN ISO 4892 |
| Cover | thermoset, UV resistant to EN ISO 4892 |
| Degree of protection | IP 65 to IEC/EN 60529 |
| B10d (10 % load) | 200 000 |
| TM | max. 20 years |
| Switch insert | 2 x Ex 14 |
| Contact material | silver |
| Switching system | slow action, positive break NC contacts  |
| Switching elements | 2 NC/2 NO contacts, type Zb |
| Connection | pre-wired cable H05VV-F |
| Cable length | 3 m |
| Rated impulse withstand voltage Uimp | 4 kV |
| Rated insulation voltage Ui | 250 V |
| Conventional thermal current Ithe | T6: 6 A, T5: 3 A |
| Utilisation category | AC-15; DC-13 |
| Rated operating current/voltage Ie/Ue | 6 A/250 VAC; 0.25 A/230 VDC |
| Short-circuit protection | 6 A gG/gN fuse |
| Ambient temperature | T6: –20 °C … +65 °C, T5: –20 °C … +75 °C, +90 °C with max. 3 A |
| Mechanical life | > 100 000 operations |
| Max. wire length | 2 x 50 m |
| Impact energy | max. 7 J |
| Ex marking |  II 2G Ex db IIC T6/T5 Gb, II 2D Ex tb IIICT80 °C/T95 °C Db IECEx Ex db IIC T6/T5 Gb, Ex tb IIIC T80 °C/T95 °C Db |
| Approvals | PTB 03 ATEX 1070 X * IECEx PTB 06.0098X * * referring to the switch insert  |
Ordering details
Accessories
Compensation spring ZS 90/91/92 S
- For emergency pull-wire switches series ZS 90 S, ZS 91 S and ZS 92 S
- With travel limitation
- Adaption of length expansions caused by changes in temperature
- Version consisting of: stainless steel chain, 2 carabiner galvanized and tension spring (1.4310)
Compensation spring ZS 90/91/92 S stainless steel
- For emergency pull-wire switches series ZS 90 S, ZS 91 S and ZS 92 S
- With travel limitation
- Adaption of length expansions caused by changes in temperature
- Version consisting of: stainless steel chain, 2 carabiner A4 (1.4401) and tension spring (1.4310)
Cable Tensioner System TS 65
- Only one tool
- Injury-free
- Ergonomically designed
- Easy to adjust
- Non-slip
- Time-saving
Tensioner M6
- For precise adjustment of pull-wire pre-stress
- According to DIN 1480
- Adjustable from 145 mm to 225 mm
Tensioner M8 stainless steel
- For precise adjustment of pull-wire pre-stress
- According to DIN 1480
- Made of stainless steel
- Adjustable from 160 mm to 255 mm
Pull-wire Ø 5 mm per metre
- Steel core Ø 3 mm with red PVC sheath
- Total diameter 5 mm
- Ordering unit: per meter
Pull-wire stainless steel Ø 5 mm per metre
- Stainless steel core Ø 3 mm with red PVC sheath
- Total diameter 5 mm
- Ordering unit: per meter
Complete pull-wire set, 5 m
- Complete pull-wire set consisting of:
5 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 10 m
- Complete pull-wire set consisting of:
10 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 15 m
- Complete pull-wire set consisting of:
15 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 20 m
- Complete pull-wire set consisting of:
20 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 25 m
- Complete pull-wire set consisting of:
25 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 30 m
- Complete pull-wire set consisting of:
30 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 40 m
- Complete pull-wire set consisting of:
40 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 50 m
- Complete pull-wire set consisting of:
50 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Pulley stainless steel
- To guide the pull-wire where the path is not a straight line
- Roller: polyamide
Wire thimble RW 4
- According to DIN 65457-35 Z
- For pull-wire with steel core Ø 4 mm
- Galvanized
- Tip 6 mm open
Eye bolt BM8 x 70 with nut, stainless steel
- According to DIN 444, type B
- 70 mm length referring to eye centre, 25 mm thread length,
M8 x 1.25 thread - Stainless steel
- 1 hexagon nut is provided
Eye bolt BM10 x 40 with nut
- According to DIN 444
- 40 mm length referring to eye centre, 25 mm thread length,
M10 x 1.5 thread - Galvanized steel
- 1 hexagon nut is provided
