Product features
Cold-resistant down to -30 °C
Thermoplastic enclosure
Double insulated X
Mounting hole diameter 22.5 mm
Mounting details to EN 50047
With pre-wired cable
Actuator: Key switch RSSA made of stainless steel (1.4404) with safety cylinder lock (locks against turning)
Standard version always has same key number
Switching position RSSA 14 (versions with other switching positions available on request)
Attention: Please state required international approvals with your order!
Technical data
General technical data
Applied standards
EN 60947-5-1, EN ISO 13849-1
Enclosure
thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Degree of protection
IP65 to IEC/EN 60529, use only with enclosure for command devices
Contact material
silver
Switching system
slow action, positive break NC contacts A
Switching elements
1 NC/1 NO contact, type Zb
Connection
cable 4 x AWG 20
Cable cross-section
4 x 0.56 mm²
Cable length
2 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
6 A
Rated operating current/voltage Ie/Ue
6 A/250 VAC; 0.25 A/230 VDC
Utilisation category
AC-15; DC-13
Short-circuit protection
6 A gG/gN fuse
Ambient temperature
–30 °C … +65 °C
Mechanical life
> 30 000 operations
Operation cycles
max. 1800/h
Contact opening
max. 2 x 4 mm
Approvals
d
Downloads
Variants / Options
The following variants / options are available on request:
- Cable entry on side