ES 95 AZ

  • Thermoplastic enclosure
  • Double insulated
  • Wiring compartment
  • Mounting details to EN 50047
  • Horizontally slotted mounting holes
  • With connector M12 x 1, 4-pole available on request
  • Gold-plated contacts available on request
  • Ex version available
Note
  • The actuator is not included in the delivery of the switches

Technical data

Applied standards EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
Enclosure thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Actuator stainless steel 1.4301
Switch type type 2
Coding level low coding
Tightening torque enclosure mounting screws: 1.2 … 1.3 Nm
cover screws: max. 0.7 Nm
Degree of protection IP 67 to IEC/EN 60529
B10d (10 % load) 2 million
TM max. 20 years
Contact material silver
Switching system slow action, positive break NC contacts
Switching elements 1 NC/1 NO contact or 2 NC contacts, type Zb
Connection screw connection terminals
Cable cross-section max. 1.5 mm² (incl. conductor ferrules)
Cable entry 1 x M20 x 1.5
Rated impulse withstand voltage Uimp 4 kV
Rated insulation voltage Ui 400 V
Conventional thermal current Ithe 6 A
Rated operating current/voltage Ie/Ue 6 A/400 VAC; 0.25 A/230 VDC
Utilisation category AC-15; DC-13
Short-circuit protection 6 A gG/gN fuse
Positive break travel 9 mm
Ambient temperature –20 °C … +80 °C
Mechanical life > 1 million operations
Approvals

Ordering details

Slow action, 1 NC/1 NO contact

Type   Material no.  
Type    Material no.   
ES 95 AZ 1Ö/1S 1177756

Slow action, 2 NC contacts

Type   Material no.  
Type    Material no.   
ES 95 AZ 2Ö 1178649

Actuators

Type   Material no.  
Type    Material no.   
Straight actuator AZ 95/97-B1 1178645
Type   Material no.  
Type    Material no.   
Angled actuator AZ 95/97-B5 1178646