ES 98 SB-02 - 10 mm

Safety switch for hinged guards
Material number: 1309563
(Material number old: 9105540001)
  • Metal enclosure
  • Mounting details to EN 50041
  • Slow action , 2 NC contacts with double break
  • Wiring compartment
  • Actuator can be repositioned by 4 x 90°
  • Shaft bore ø 10 mm
Contact

Technical data

Applied standards EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
Enclosure aluminium die-cast, powder-coated
Switch type type 1
Coding level no coding
Degree of protection IP 67 to IEC/EN 60529
B10d (10 % load) 2 million
TM max. 20 years
Contact material silver
Switching system slow action, positive break NC contacts
Switching elements 2 NC contacts, type Zb
Connection screw connection terminals
Cable cross-section max. 2.5 mm² (incl. conductor ferrules)
Cable entry 1 x M20 x 1.5
Rated impulse withstand voltage Uimp 4 kV
Rated insulation voltage Ui 400 V
Conventional thermal current Ithe 6 A
Rated operating current/voltage Ie/Ue 6 A/250 VAC; 0.25 A/230 VDC
Utilisation category AC-15; DC-13
Short-circuit protection 6 A gG/gN fuse
Ambient temperature –20 °C … +80 °C
Mechanical life > 1 million operations
Approvals
Weight 278 g

Downloads

Switching diagram

Positive break travel/angle

Contact diagram

Accessories

Universal joint K2
  • Suitable for ES 95 SB-10mm, ES/Ex 98 and Ex 355 V10S
  • Factory-mounted pins
  • Suitable only in conntection with hinges F and L
Fixed hinge F
  • Suitable for ES 95 SB-10mm, ES/Ex 98 and Ex 355 V10S
  • Incl. locating pins, 1 blanking plug and 2 screws
    M5 x 20 to ISO 7380
Adjustable hinge L
  • Suitable for ES 95 SB-10mm, ES/Ex 98 and Ex 355 V10S
  • Incl. locating pins, 1 blanking plug and 2 screws
    M5 x 20 to ISO 7380