RF RC M30
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
ZS 75 S
- Metal enclosure
- 2 or 4 contacts
- Wire length up to 2 x 100 m
- Release by push button (VD), key (VS) or pull ring (VZ) possible
- Available without unlocking mechanism (to EN 60947-5-1)
- Wire pull and breakage detection
- Indicator lamps for various voltages can be found in the chapter Accessories in the Appendix
- Indicator lamp position in the left side cable entry, other positions possible on request
- Version with Dupline or Dupline Safe available on request
- Ex version available
- Version for low temperatures down to -40 °C with high degree of protection IP 67 available - see chapter
/ ZS 75 S IP67 -40°C Extreme >
Technical data
| Applied standards | EN 60947-5-1, EN 60947-5-5, EN ISO 13850, EN ISO 13849-1 |
|---|---|
| Enclosure | aluminium die-cast, powder-coated |
| Cover | aluminium die-cast, powder-coated |
| Degree of protection | ZS 75 S VD: IP 65 ZS 75 S VS: IP 54 ZS 75 S VZ: IP 67 to IEC/EN 60529 |
| B10d (10 % load) | 200 000 |
| TM | max. 20 years |
| Contact material | silver |
| Switching elements | 1 NC/1 NO contact, 2 NC/2 NO contacts or 4 NC contacts, type Zb |
| Switching system | snap action, positive break NC contacts  |
| Connection | screw connection terminals |
| Cable cross-section | max. 2.5 mm² (incl. conductor ferrules) |
| Cable entry | 2 x M25 x 1.5 |
| Rated impulse withstand voltage Uimp | 6 kV |
| Rated insulation voltage Ui | 400 V |
| Conventional thermal current Ithe | 6 A |
| Utilisation category | AC-15 |
| Rated operating current/voltage Ie/Ue | 6 A/400 VAC |
| Short-circuit protection | 6 A gG/gN fuse |
| Ambient temperature | –25 °C … +70 °C |
| Mechanical life | > 100 000 operations |
| Indicator lamp | as option |
| Max. wire length | 2 x 100 m |
| Approvals |     |
Ordering details
Release by key
| ZS 75 S 1Ö/1S VS | 1048340 | ||
| ZS 75 S 2Ö/2S VS | on request Produced to order. | ||
| If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants. | |||
| ZS 75 S 4Ö VS | on request Produced to order. | ||
| If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants. | |||
Accessories
Compensation spring ZS 73/75 S
- Version consisting of: wire rope with red PVC sheath, 2 carabiner galvanized and tension spring (1.4310)
Cable Tensioner System TS 65
- Only one tool
- Injury-free
- Ergonomically designed
- Easy to adjust
- Non-slip
- Time-saving
Tensioner M6
- For precise adjustment of pull-wire pre-stress
- According to DIN 1480
- Adjustable from 145 mm to 225 mm
Tensioner M8 stainless steel
- For precise adjustment of pull-wire pre-stress
- According to DIN 1480
- Made of stainless steel
- Adjustable from 160 mm to 255 mm
Pull-wire Ø 5 mm per metre
- Steel core Ø 3 mm with red PVC sheath
- Total diameter 5 mm
- Ordering unit: per meter
Pull-wire stainless steel Ø 5 mm per metre
- Stainless steel core Ø 3 mm with red PVC sheath
- Total diameter 5 mm
- Ordering unit: per meter
Complete pull-wire set, 5 m
- Complete pull-wire set consisting of:
5 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 10 m
- Complete pull-wire set consisting of:
10 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 15 m
- Complete pull-wire set consisting of:
15 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 20 m
- Complete pull-wire set consisting of:
20 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 25 m
- Complete pull-wire set consisting of:
25 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 30 m
- Complete pull-wire set consisting of:
30 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 40 m
- Complete pull-wire set consisting of:
40 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Complete pull-wire set, 50 m
- Complete pull-wire set consisting of:
50 m pull-wire Ø 3 mm with 2 mm PVC sheath,
2 wire clamps DIN 741,
1 wire thimble DIN 65457,
1 eye bolt DIN 444 and
1 Duplex wire clamp
Wire thimble RW 4
- According to DIN 65457-35 Z
- For pull-wire with steel core Ø 4 mm
- Galvanized
- Tip 6 mm open
Eye bolt M8 x 70 with nut
- According to DIN 444
- 70 mm length referring to eye centre, 25 mm thread length,
M8 x 1.25 thread
Eye bolt BM10 x 40 with nut
- According to DIN 444
- 40 mm length referring to eye centre, 25 mm thread length,
M10 x 1.5 thread
