RF I/O Vcc extern

  • Thermoplastic enclosure
  • sWave® wireless technology (SW868/SW915/SW917/SW922)
  • 4 connectors: for the use with wireless sensors, series RF, 3-wire PNP sensors 24 VDC and/or external NO contacts with gold contacts
  • No wiring and pipe laying required
  • External power supply via M12 female plug-in connector
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
  • Delivery does not include protective caps.

Technical data

EnclosureABS (Acrylnitril-Butadien-Styrol)
ConnectionSensors: plug-in connector 4 x M12 x 1, 4-pole
power supply: 1 x M12 female plug-in connector
Degree of protectionIP 67 to IEC/EN 60529
Ambient temperature–20 °C … +65 °C
Switching frequencymax. 5 Hz
Rated operating voltage range UB18 - 30 VDC Pin 1 and Pin 3 connector M12
Rated operating isolation voltage Ui75 VDC
Uimp500 V
Rated operating current Ie2.5 mA
Voltage drop Ue Ua- 3.5 V with 4 x 50 mA sensor current
Max. load current per sensor connection50 mA
Switching point E1 - E4> 5 VDC
Frequency868.3 MHz (EU, Switzerland) or 915 MHz (USA, Canada and Mexico) or 917 MHz (Brazil) or 916.5 MHz (Japan)
Data rate66 kbps
Wireless rangeSW868/915/917:
max. 450 m outside,
max. 40 m inside
max. 150 m outside,
max. 20 m inside
Actuating timemin. 80 ms
NoteStatus signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
Delivery state: jumper position without status signal

Products by Wireless technology