RF 96 ST SW922

  • Thermoplastic enclosure
  • Mounting details to EN 50047
  • Plug-in connector M12
  • sWave® wireless technology
  • No wiring and pipe laying required
  • Power supply by Lithium battery
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Notes
  • The RF 96 ST may be used in combination with wireless inductive sensor RF IS
  • Connection of external switching contact (potentialfree contact) with gold contacts possible.

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Enclosureglass-fibre reinforced, shock-proof thermoplastic (PA 66), self-extinguishing UL 94-V0
Tightening torqueM4 mounting screw enclosure: max 1.2 Nm,
M2.5 cover screws: approx. 0.45 Nm
ConnectionPlug-in connector M12 x 1, 4-pole
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Operation cyclesmax. 1440 telegrams/h
Switching frequencymax. 5 Hz
Standby current15 µA
Voltage supplyLithium battery SL-2770 (replaceable)
Capacity8.5 Ah
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth520 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Battery life SL-2770 (C)according to switching frequency,
1 s approx. 780 days,
10 s approx. 1300 days,
100 s approx. 1400 days
Actuating timemin. 80 ms
NoteStatus signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
Delivery state: jumper position without status signal
Transmission of battery voltage and switching condition
Approvals Japan: ARIB STD-T108: 204-610002

Ordering details

Type   Material no.  
Type    Material no.   
RF 96 ST SW922 on request Produced to order.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Accessories

Coupling M12 x 1, 4-poles straight 2m
  • Coupler for wireless universal transmitter
  • Resistant to average mechanical stress
  • Plastic moulded connector
  • PVC cable
Coupling M12 x 1, 4-poles straight 5m
  • Coupler for wireless universal transmitter
  • Resistant to average mechanical stress
  • Plastic moulded connector
  • PVC cable
Wireless receiver RF Rx SW922-2W-RS232 24 VAC/DC
  • SMA reverse plug-in connector for external antenna
  • 2 change-over contacts, max. 6 A
  • sWave® wireless technology
  • RS 232 interface
  • 2 potential-free relay outputs
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver RF Rx SW922-4S 24 VDC
  • 4 NO contacts, max. 3 A
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless receiver RF Rx SW922-TCP/IP
  • Webserver based Setup
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • LEDs for indication of operating state
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • Transmitter/receiver assignment by teaching mode
Wireless receiver / repeater RF RxT SW922-USB
  • Virtual COM Port driver for Microsoft Windows, Linux, Apple Mac
  • Repeater (1-Level and 2-Level Repeater Mode)
  • Sniffer Mode
  • USB Gateway Mode
  • USB-Standard Receiver Mode
  • Different operating modes
RF magnet antenna SMA plug-in connector straight 2.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 2.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF magnet antenna 5dBi SMA plug-in connector straight 1.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 1.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
  • Suitable for antennae with SMA plug-in connector
RF SMA antenna extension 3 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 3 m
RF SMA antenna extension 5 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 5 m