RF Rx SW868-4S

  • sWave® wireless technology
  • 4 potential-free relay outputs
  • 4 NO contacts, max. 3 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Note

Technical data

Applied standardsEN 60947-5-1;
EN 61000-6-2, -6-3, -4-2, -4-20,
EN 61000-4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Number of channels4
MountingDIN rail mounting
Connectionscrew connection terminals 0.14 mm² - 2,5 mm², stripping length 8 mm
Degree of protectionIP 20 to IEC/EN 60529
Inputs4 wireless channels, max. 40 transmitters
Outputs4 NO contacts (relay)
Rated operating current/voltage Ie/Uemax. 0.1 A/24 VDC -15 % … +10 %;
output contacts: 3 A/250 VAC; 3 A/24 VDC
Utilisation categoryAC-15; DC-13
Rated operating isolation voltage Ui250 VAC
Rated impulse withstand voltage Uimp2.5 kV
Frequency868.3 MHz (EU, Switzerland)
Channel bandwidth480 kHz
Displaygreen LED: operating state,
orange LED: switching conditions
Operation cyclesapprox. 12000 telegrams with repetitions/h
Degree of pollution2
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
NoteInductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry. Switching contacts are not suitable for capacitive loads.
Wireless approvalsEU: RED 2014/53/EU

Ordering details

Type   Material no.  
Type    Material no.   
RF Rx SW868-4S 24VDC - SET stock type Standard versions, in stock or available at short notice 1373201
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
Type   Material no.  
Type    Material no.   
RF Rx SW868-4S 24VDC stock type Standard versions, in stock or available at short notice 1357703
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Power-down-function

Type   Material no.  
Type    Material no.   
RF Rx SW868-4S 24VDC Power-down-function stock type Standard versions, in stock or available at short notice 1363011
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Accessories

RF magnet antenna 5dBi SMA plug-in connector straight 1.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 1.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF magnet antenna 2dBi SMA plug-in connector straight 2 m
  • Suitable for SW868 and EN868
  • Cable length 2 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
  • Suitable for antennae with SMA plug-in connector
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
  • Suitable for SW868 and EN868
  • RF magnet antenna with straight TNC plug-in connector
  • Cable length 3.6 m
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
  • RF SMA antenna socket with straight TNC plug-in connector
  • Suitable for RF antenna 1275629
  • Cable length 0.5 m
RF SMA antenna extension 3 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 3 m
RF SMA antenna extension 5 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 5 m
Power supply 24V DC
  • Panel installation on mounting rails
  • Service-friendly spring-loaded connector system
  • Parallel connection option
  • DC OK signalling via LEDs
  • Stabilised and adjustable output voltage