RF Rx SW868-1W

  • sWave® wireless technology
  • 1 potential-free relay output
  • 1 change-over contact, max. 6 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
Note
  • External antenna always required for optimum wireless range

Technical data

Applied standardsEN 60947-5-1;
EN 61000-6-2, -6-3, -4-2, -4-20,
EN 61000-4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Number of channels1
MountingDIN rail mounting
Connectionterminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Degree of protectionIP 20 to IEC/EN 60529
Inputs1 wireless channel, max. 10 transmitters per channel
Outputs1 change-over contact (relay)
Rated operating current/voltage Ie/Uemax. 0.03 A/24 VDC -15 % … +10 %;
max. 0.07 A/24 VAC -15 % … +10 %;
output contacts: 6 A/250 VAC; 2 A/24 VDC
Utilisation categoryAC-15; DC-13
Rated operating isolation voltage Ui250 VAC
Rated impulse withstand voltage Uimp2.5 kV
Frequency868.3 MHz (EU, Switzerland)
Displaygreen LED: operating state,
orange LED: switching conditions
Operation cyclesapprox. 12000 telegrams with repetitions/h
Degree of pollution2
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
NoteInductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Wireless approvalsEU: RED 2014/53/EU

Ordering details

Type   Material no.  
Type    Material no.   
RF Rx SW868-1W 24 VAC/DC stock type Standard versions, in stock or available at short notice 1190427
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Accessories

RF magnet antenna 5dBi SMA plug-in connector straight 1.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 1.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF magnet antenna 2dBi SMA plug-in connector straight 2 m
  • Suitable for SW868 and EN868
  • Cable length 2 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
  • Suitable for antennae with SMA plug-in connector
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
  • Suitable for SW868 and EN868
  • RF magnet antenna with straight TNC plug-in connector
  • Cable length 3.6 m
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
  • RF SMA antenna socket with straight TNC plug-in connector
  • Suitable for RF antenna 1275629
  • Cable length 0.5 m
RF SMA antenna extension 3 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 3 m
RF SMA antenna extension 5 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 5 m
Power supply 24V DC
  • Panel installation on mounting rails
  • Service-friendly spring-loaded connector system
  • Parallel connection option
  • DC OK signalling via LEDs
  • Stabilised and adjustable output voltage