RF 95 WH/90° EN868

  • Thermoplastic enclosure
  • Mounting details to EN 50047
  • Including 3.2 m long pull-wire and ball
  • EnOcean® wireless technology
  • No power supply, no wiring and pipe laying required
  • Easy programming of receiver
  • Multi-network capable
  • Output signal can be individually configurated at the receiver
  • Ex version available
    / Ex wireless pull-wire switch Ex RF 95 WH/90°

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Enclosureglass-fibre reinforced, shock-proof thermoplastic (PA 66), self-extinguishing UL 94-V0
Coverglass-fibre reinforced, shock-proof thermoplastic (PA 66), self-extinguishing UL 94-V0
Tightening torquemounting screw enclosure: max. 1.2 ... 1.3 Nm
Degree of protectionIP 67 to IEC/EN 60529
ProtocolEnOcean®
Ambient temperature–20 °C … +65 °C
Operation cyclesapprox. 9000 telegrams at repetitions/h
Voltage supplyElectrodynamic energy generator
Frequency868.3 MHz (EU, Switzerland)
Transmission powermax. 10 mW
Data rate120 kbps
Channel bandwidth530 kHz
Wireless rangemax. 200 m outside,
max. 20 m inside
Mechanical life> 1 million operations
Actuating timemin. 80 ms
Noteno status signal available

Ordering details

1 NO contact

Type   Material no.  
Type    Material no.   
RF 95 WH/90° EN868 - 3.2 m nylon pull-wire with rubber ball stock type Standard versions, in stock or available at short notice 1181193
Order now
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Accessories

Wireless receiver RF Rx EN868-TCP/IP
  • Webserver based Setup
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • LEDs for indication of operating state
  • SMA plug-in connector for external antenna
  • Transmitter/receiver assignment by teaching mode
  • EnOcean® wireless technology
Wireless receiver RF RxT EN868-USB
  • Support of up to 128 actors and an indefinite number of transmitters
  • USB 2.0 transmitter and receiver unit
  • Power supply via USB interface
  • EnOcean® wireless technology
  • Multi-network capable
  • Thermoplastic enclosure
Wireless receiver RF Rx EN868-1W 24 VDC
Wireless receiver RF Rx EN868-NPN 24 VDC
Wireless receiver RF Rx EN868-PNP 24 VDC
Wireless receiver RF Rx EN868-2W 24 VAC/DC
  • 2 change-over contacts, max. 6 A
  • 2 potential-free relay outputs
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • EnOcean® wireless technology
Wireless receiver RF Rx EN868-2W-RS232 24 VAC/DC
  • 2 change-over contacts, max. 6 A
  • RS 232 interface
  • 2 potential-free relay outputs
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • EnOcean® wireless technology
Wireless receiver RF Rx EN868-2W-s-RS232 24 VDC
  • 2 change-over contacts, max. 6 A
  • Version with Power-down function
  • RS 232 interface
  • 2 potential-free relay outputs
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • EnOcean® wireless technology
Wireless receiver RF Rx EN868-4W 24 VAC/DC
  • 4 change-over contacts, max. 6 A
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
  • EnOcean® wireless technology
Wireless repeater RF RxT EN868-230VAC
  • FME plug-in connector for external antenna
  • On-wall mounting
  • EnOcean® wireless technology
Power supply 24V DC
  • Panel installation on mounting rails
  • Service-friendly spring-loaded connector system
  • Parallel connection option
  • DC OK signalling via LEDs
  • Stabilised and adjustable output voltage
Field strength testing tool EPM 300 EN868
  • Repeater mode can be selected
  • The battery is not included in the delivery, requires
    an AA/LR91 lithium battery
  • Only suitable for EnOcean® wireless technology
  • To measure and indicate the electrical field strength
  • Mobile field strength indicator for link range testing
RF magnet antenna SMA plug-in connector straight 2.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 2.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF magnet antenna 2dBi SMA plug-in connector straight 2 m
  • Suitable for SW868 and EN868
  • Cable length 2 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
  • Suitable for antennae with SMA plug-in connector
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
  • Suitable for SW868 and EN868
  • RF magnet antenna with straight TNC plug-in connector
  • Cable length 3.6 m
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
  • RF SMA antenna socket with straight TNC plug-in connector
  • Suitable for RF antenna 1275629
  • Cable length 0.5 m
RF SMA antenna extension 3 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 3 m
RF SMA antenna extension 5 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 5 m
RF High gain antenna 868MHz
  • Internally grounded as lightning protection
  • 3.5 dBi gain
  • RF High gain antenna suitable for mast mounting up to max. 41 mm diametre
RF SMA N antenna extension 5 m
  • Plug on right side: straight N-type Crimp plug
  • Plug on left side: straight SMA Crimp plug
  • Cable length 5 m
  • For RF High gain antenna
  • RF SMA N antenna extension cable with straight SMA plug-in connector
RF SMA N antenna extension 10 m
  • Plug on right side: straight N-type Crimp plug
  • Plug on left side: straight SMA Crimp plug
  • Cable length 10 m
  • For RF High gain antenna
  • RF SMA N antenna extension cable with straight SMA plug-in connector
Mounting bracket for high gain antenna
  • Welded aluminium
  • Distance to wall approx. 17 cm
  • Mounting bracket for wall mounting