Wireless position switch - RF 96 TK SW868

Product features

Thermoplastic enclosure
Mounting details to EN 50047
Output signal can be individually configured at the receiver
sWave^® wireless technology
No wiring and pipe laying required
Power supply by Lithium battery (replaceable)
Easy programming of receiver
Actuator: Spring rod with plastic tip TK

Notes

Factory delivery with battery type SL-760 (AA)

Technical data

General technical data

Applied standards

EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2

Enclosure

thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0

Cover

thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0

Tightening torque

M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm

Degree of protection

IP67 (IEC/EN 60529)

Ambient temperature

–20 °C … +65 °C

Operation cycles

max. 12000 telegrams with repetitions/h

Standby current

1.5 µA

Mechanical life

> 1 million operations

Actuating time

min. 80 ms

Note

status signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
delivery state: jumper position without status signal
transmission of battery voltage and switching condition

Wireless approvals

Europe: RED 2014/53/EU

Weight

160 g

Wireless technology

Protocol

sWave®

Frequency

868.3 MHz (Europe)

Transmission power

< 25 mW

Data rate

66 kbps

Channel bandwidth

350 kHz

Wireless range

max. 450 m outdoors, max. 40 m indoors

Voltage supply

Voltage source

lithium battery Tadiran SL-2770 (replaceable)

System

Li/SOCl₂

Nominal voltage

3.6 V

Nominal capacity

8.5 Ah

Battery life

depending on the switching frequency
sensor mainly not activated
1 s: approx. 5.8 years,
10 s: > 10 years*
sensor mainly activated
1 s: approx. 5.6 years,
10 s: > 10 years*
* max. manufacturer's specification of storage life

Alternative voltage supply