RF 13 R SW915

Wireless position switch
Material number: 1378083
  • sWave® wireless technology
  • Thermoplastic enclosure
  • Smallest self-sufficient position switch
  • Switching behaviour/ hysteresis similar to microswitch
  • No power supply, no wiring and pipe laying required
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
  • Actuator: Roller plunger R
  • Metal roller
Note
  • Actuator can be repositioned by 90° on request
In stock
Contact

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Enclosureglass-fibre reinforced, shock-proof thermoplastic (PA 66), self-extinguishing UL 94-V0
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Operation cyclesapprox. 12000 telegrams at repetitions/h
Voltage supplyElectrodynamic energy generator
Frequency915 MHz (USA, Canada and Mexico)
Transmission power< 10 mW
Data rate66 kbps
Channel bandwidth550 kHz
Wireless rangemax. 450 m outside,
max. 40 m inside
Mechanical life800 000 operations
Actuating timemin. 80 ms
Actuating speed Vmin. 0.03 m/s; max. 0.25 m/s
Noteno status signal available
ApprovalsUSA: FCC: XK5-RF95SW915LR;
Canada: IC: 5158A-RF95SW915LR
Mexico: IFT/223/UCS/DG-AUSE/6772/2017

Switching diagram

> Switch-on travel

< Switch-off travel, zero position must be achieved again


Accessories

Wireless receiver RF Rx SW915-TCP/IP
  • Webserver based Setup
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • LEDs for indication of operating state
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • Transmitter/receiver assignment by teaching mode
Wireless receiver / repeater RF RxT SW915-USB
  • Virtual COM Port driver for Microsoft Windows, Linux, Apple Mac
  • Repeater (1-Level and 2-Level Repeater Mode)
  • Sniffer Mode
  • USB Gateway Mode
  • USB-Standard Receiver Mode
  • Different operating modes
Wireless receiver RF Rx SW915-1W 24 VAC/DC
  • SMA reverse plug-in connector for external antenna
  • 1 change-over contact, max. 6 A
  • sWave® wireless technology
  • 1 potential-free relay output
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver RF Rx SW915-2W-RS232 24 VAC/DC
  • SMA reverse plug-in connector for external antenna
  • 2 change-over contacts, max. 6 A
  • sWave® wireless technology
  • RS 232 interface
  • 2 potential-free relay outputs
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver RF Rx SW915-4W 24 VAC/DC
  • 4 change-over contacts
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless receiver RF Rx SW915-4S 24 VDC - SET
  • 4 NO contacts, max. 3 A
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless repeater RF RxT SW915-1K
  • 1-level repeater: for the signal gain between transmitter and receiver
  • LEDs for indication of operating state
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
Wireless repeater RF RxT SW915-2K
  • 2-level repeater: for the signal gain of one 1-level repeater
  • 1-level repeater: for the signal gain between transmitter and receiver
  • LEDs for indication of operating state
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
Power supply 24V DC
  • Panel installation on mounting rails
  • Service-friendly spring-loaded connector system
  • Parallel connection option
  • DC OK signalling via LEDs
  • Stabilised and adjustable output voltage
RF magnet antenna 5dBi R-SMA plug-in connector straight 3.6 m
  • Suitable for SW915
  • Cable length 3.6 m
  • RF magnet antenna with straight R-SMA plug-in connector without ferrite core
RF magnet antenna 2dBi R-SMA plug-in connector straight 2 m
  • Suitable for SW915
  • Cable length 2 m
  • RF magnet antenna with straight R-SMA plug-in connector without ferrite core
RF R-SMA antenna extension 3 m
  • RF R-SMA antenna extension cable with straight R-SMA plug-in connector
  • Suitable for sWave® wireless technology
  • Cable length 3 m
Field strength testing tool swView 915 MHz
  • Only suitable for sWave® 915 MHz wireless technology
  • Several functions can be selected: Scan-Mode, Repeat-Mode, Rescan-Mode, Radio-Link
  • The battery is included in the delivery
  • To measure and indicate the electrical field strength
  • Mobile field strength indicator for link range testing