RF 96 LT SW922

Wireless optical sensor
Material number: 1476565
  • sWave® wireless technology
  • Light sensor: registration by light reflection
  • Power supply by Lithium battery (replaceable)
  • Simple assembly in commercially available standard shelves
  • Low switching frequency < 1 Hz
  • Easy programming of receiver
Contact

Technical data

Applied standardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Enclosureglass-fibre reinforced, shock-proof thermoplastic, self-extinguishing UL 94 V-0
Tightening torqueM4 enclosure mounting screw: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
SensorIr reflective light sensor
Degree of protectionIP 40 to IEC/EN 60529
ProtocolsWave®
Ambient temperature0 °C … +65 °C
Operation cyclesmax. 1440 telegrams with repetitions/h
Switching distanceswhite paper: 170 mm
grey card 18% reflection: 90 mm
storage box blue: 90 mm
storage box red: 120 mm
storage box black: 40 mm
Switching frequencymax. 1 Hz
Standby current130 µA sensor not actuated,
250 µA sensor actuated
Voltage supplyLithium battery Tadiran SL-2770 (replaceable)
Nominal capacity8.5 Ah
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth520 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Actuating timemin. 300 ms
Mechanical life> 1 million operations
Battery life SL-2770 (C)depending on the switching frequency
sensor mainly not activated
1 s - ca. 1070 days, 10 s - ca. 2300 days, 100 s - ca. 2600 days
sensor mainly activated
1 s - ca. 1000 days, 10 s - ca. 1300 days, 100 s - ca. 1400 days
NoteStatus signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
Delivery state: jumper position without status signal
Transmission of battery voltage and switching condition
Wireless approvalsJapan: ARIB STD-T108: 204-610002

Accessories

Wireless receiver
RF Rx SW922-2W-RS232 24 VAC/DC
  • 2 change-over contacts, max. 6 A
  • sWave® wireless technology
  • RS 232 interface
  • 2 potential-free relay outputs
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver
RF Rx SW922-4S 24VDC
  • 4 NO contacts, max. 3 A
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless receiver
RF Rx SW922-TCP/IP
  • Webserver based Setup
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • LEDs for indication of operating state
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • Transmitter/receiver assignment by teaching mode
Wireless receiver / repeater
RF RxT SW922-USB
  • Virtual COM Port driver for Microsoft Windows, Linux, Apple Mac
  • Repeater (1-Level and 2-Level Repeater Mode)
  • Sniffer Mode
  • USB Gateway Mode
  • USB-Standard Receiver Mode
  • Different operating modes
RF magnet antenna SMA plug-in connector straight 2.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 2.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF magnet antenna 5dBi SMA plug-in connector straight 1.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 1.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
  • Suitable for antennae with SMA plug-in connector
RF SMA antenna extension 3 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 3 m
RF SMA antenna extension 5 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 5 m