RF RC M30 SW922

  • Thermoplastic or stainless steel enclosure
  • RF RC M30 … : Sensor with reed contact
  • RF GS M30 … : Sensor based on GMR effect - on request
  • RF HS M30 … : Sensor with Hall sensor - on request
  • sWave® wireless technology
  • Power supply by Lithium battery
  • No wiring and pipe laying required
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Notes
  • 2 mounting nuts are included in delivery
  • The actuator is not included in the delivery of the switches

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureStainless steel 1.4539 or PVC-C
Type of installationflush, in not ferromagnetic material
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–25 °C … +65 °C
Switching systemReed contact MK17, GMR sensor or
Hall element
Switching distancesM 100: sn > 15 mm;
M 100: sa 0 … 12,15 mm
M 30 Niro: sn > 30 mm;
M 30 Niro: sa 0 … 24,3 mm
Hysteresis< 1 mm
Operation cyclesmax. 1440 telegrams/h
Voltage supplyLithium-battery CR 2032 (replaceable)
Current absorptionwithout transmissions: Reed contact: approx. 1 μA;
GMR sensor: <5 μA;
Hall sensor: <10 μA
Capacityapprox. 240 mAh
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth520 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Mechanical life> 1 million operations
Battery lifeapprox. 10 years unused,
Reed switch: approx. 6 years with 1 actuation per min.,
Hall sensor: approx. 6 years with 1 actuation per min.
Actuating timemin. 80 ms
Approvals Japan: ARIB STD-T108: 204-610002

Ordering details

Stainless steel enclosure

Reed contact

Type   Material no.  
Type    Material no.   
RF RC M30 SW922 NIRO on request Produced to order.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Thermoplastic enclosure

Reed contact

Type   Material no.  
Type    Material no.   
RF RC M30 SW922 KST on request Produced to order.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Actuators

Type   Material no.  
Type    Material no.   
M 30 Niro stock type Standard versions, in stock or available at short notice 1189024
Order now
Type   Material no.  
Type    Material no.   
M 100 N stock type Standard versions, in stock or available at short notice 1042609
Order now

Accessories

Wireless receiver RF Rx SW922-2W-RS232 24 VAC/DC
  • SMA reverse plug-in connector for external antenna
  • 2 change-over contacts, max. 6 A
  • sWave® wireless technology
  • RS 232 interface
  • 2 potential-free relay outputs
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver RF Rx SW922-4S 24 VDC
  • 4 NO contacts, max. 3 A
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless receiver RF Rx SW922-TCP/IP
  • Webserver based Setup
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • LEDs for indication of operating state
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • Transmitter/receiver assignment by teaching mode
Wireless receiver / repeater RF RxT SW922-USB
  • Virtual COM Port driver for Microsoft Windows, Linux, Apple Mac
  • Repeater (1-Level and 2-Level Repeater Mode)
  • Sniffer Mode
  • USB Gateway Mode
  • USB-Standard Receiver Mode
  • Different operating modes
RF magnet antenna SMA plug-in connector straight 2.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 2.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF magnet antenna 5dBi SMA plug-in connector straight 1.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 1.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
  • Suitable for antennae with SMA plug-in connector
RF SMA antenna extension 3 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 3 m
RF SMA antenna extension 5 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 5 m