RF RC M30 SW915

  • Thermoplastic or stainless steel enclosure
  • RF RC M30 … : Sensor with reed contact
  • RF GS M30 … : Sensor based on GMR effect - on request
  • RF HS M30 … : Sensor with Hall sensor - on request
  • sWave® wireless technology
  • Power supply by Lithium battery
  • No wiring and pipe laying required
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Notes
  • 2 mounting nuts are included in delivery
  • The actuator is not included in the delivery of the switches

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureStainless steel 1.4539 or PVC-C
Type of installationflush, in not ferromagnetic material
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–25 °C … +65 °C
Switching systemReed contact MK17, GMR sensor or
Hall element
Switching distancesM 100: sn > 15 mm;
M 100: sa 0 … 12,15 mm
M 30 Niro: sn > 30 mm;
M 30 Niro: sa 0 … 24,3 mm
Hysteresis< 1 mm
Operation cyclesapprox. 12000 telegrams at repetitions/h
Voltage supplyLithium-battery CR 2032 (replaceable)
Current absorptionwithout transmissions: Reed contact: approx. 1 μA;
GMR sensor: <5 μA;
Hall sensor: <10 μA
Capacityapprox. 240 mAh
Frequency915 MHz (USA, Canada and Mexico)
Transmission powermax. 10 mW
Data rate66 kbps
Channel bandwidth550 kHz
Wireless rangemax. 450 m outside,
max. 40 m inside
Mechanical life> 1 million operations
Battery lifeapprox. 10 years unused,
Reed switch: approx. 6 years with 1 actuation per min.,
Hall sensor: approx. 6 years with 1 actuation per min.
Actuating timemin. 80 ms
ApprovalsUSA: FCC: XK5-RFRXSW915;
Canada: IC: 5158A-RFRXSW915;
Mexico: IFT/223/UCS/DG-AUSE/6773/2017

Ordering details

Stainless steel enclosure

Reed contact

Type   Material no.  
Type    Material no.   
RF RC M30 SW915 NIRO 1364786
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Thermoplastic enclosure

Reed contact

Type   Material no.  
Type    Material no.   
RF RC M30 SW915 KST 1362227
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Actuators

Type   Material no.  
Type    Material no.   
M 30 Niro stock type Standard versions, in stock or available at short notice 1189024
Order now
Type   Material no.  
Type    Material no.   
M 100 N stock type Standard versions, in stock or available at short notice 1042609
Order now

Accessories

Wireless receiver RF Rx SW915-TCP/IP
  • Webserver based Setup
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • LEDs for indication of operating state
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • Transmitter/receiver assignment by teaching mode
Wireless receiver / repeater RF RxT SW915-USB
  • Virtual COM Port driver for Microsoft Windows, Linux, Apple Mac
  • Repeater (1-Level and 2-Level Repeater Mode)
  • Sniffer Mode
  • USB Gateway Mode
  • USB-Standard Receiver Mode
  • Different operating modes
Wireless receiver RF Rx SW915-1W 24 VAC/DC
  • SMA reverse plug-in connector for external antenna
  • 1 change-over contact, max. 6 A
  • sWave® wireless technology
  • 1 potential-free relay output
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver RF Rx SW915-2W-RS232 24 VAC/DC
  • SMA reverse plug-in connector for external antenna
  • 2 change-over contacts, max. 6 A
  • sWave® wireless technology
  • RS 232 interface
  • 2 potential-free relay outputs
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver RF Rx SW915-4W 24 VAC/DC
  • 4 change-over contacts
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless receiver RF Rx SW915-4S 24 VDC - SET
  • 4 NO contacts, max. 3 A
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless repeater RF RxT SW915-1K
  • 1-level repeater: for the signal gain between transmitter and receiver
  • LEDs for indication of operating state
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
Wireless repeater RF RxT SW915-2K
  • 2-level repeater: for the signal gain of one 1-level repeater
  • 1-level repeater: for the signal gain between transmitter and receiver
  • LEDs for indication of operating state
  • SMA reverse plug-in connector for external antenna
  • sWave® wireless technology
Power supply 24V DC
  • Panel installation on mounting rails
  • Service-friendly spring-loaded connector system
  • Parallel connection option
  • DC OK signalling via LEDs
  • Stabilised and adjustable output voltage
RF magnet antenna 5dBi R-SMA plug-in connector straight 3.6 m
  • Suitable for SW915
  • Cable length 3.6 m
  • RF magnet antenna with straight R-SMA plug-in connector without ferrite core
RF magnet antenna 2dBi R-SMA plug-in connector straight 2 m
  • Suitable for SW915
  • Cable length 2 m
  • RF magnet antenna with straight R-SMA plug-in connector without ferrite core
RF R-SMA antenna extension 3 m
  • RF R-SMA antenna extension cable with straight R-SMA plug-in connector
  • Suitable for sWave® wireless technology
  • Cable length 3 m
Field strength testing tool swView 915 MHz
  • Only suitable for sWave® 915 MHz wireless technology
  • Several functions can be selected: Scan-Mode, Repeat-Mode, Rescan-Mode, Radio-Link
  • The battery is included in the delivery
  • To measure and indicate the electrical field strength
  • Mobile field strength indicator for link range testing