RF RC M30 SW868

  • Thermoplastic or stainless steel enclosure
  • RF RC M30 … : Sensor with reed contact
  • RF GS M30 … : Sensor based on GMR effect - on request
  • RF HS M30 … : Sensor with Hall sensor - on request
  • sWave® wireless technology
  • Power supply by Lithium battery
  • No wiring and pipe laying required
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Notes
  • 2 mounting nuts are included in delivery
  • The actuator is not included in the delivery of the switches

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureStainless steel 1.4539 or PVC-C
Type of installationflush, in not ferromagnetic material
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–25 °C … +65 °C
Switching systemReed contact MK17, GMR sensor or
Hall element
Switching distancesM 100: sn > 15 mm;
M 100: sa 0 … 12,15 mm
M 30 Niro: sn > 30 mm;
M 30 Niro: sa 0 … 24,3 mm
Hysteresis< 1 mm
Operation cyclesapprox. 12000 telegrams at repetitions/h
Voltage supplyLithium-battery CR 2032 (replaceable)
Current absorptionwithout transmissions: Reed contact: approx. 1 μA;
GMR sensor: <5 μA;
Hall sensor: <10 μA
Capacityapprox. 240 mAh
Frequency868.3 MHz (EU, Switzerland)
Transmission power< 25 mW
Data rate66 kbps
Channel bandwidth480 kHz
Wireless rangemax. 450 m outside,
max. 40 m inside
Mechanical life> 1 million operations
Battery lifeapprox. 10 years unused,
Reed switch: approx. 6 years with 1 actuation per min.,
Hall sensor: approx. 6 years with 1 actuation per min.
Actuating timemin. 80 ms

Ordering details

Stainless steel enclosure

Reed contact

Type   Material no.  
Type    Material no.   
RF RC M30 SW868 NIRO 1363715
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Thermoplastic enclosure

Reed contact

Type   Material no.  
Type    Material no.   
RF RC M30 SW868 KST 1349227
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Actuators

Type   Material no.  
Type    Material no.   
M 30 Niro stock type Standard versions, in stock or available at short notice 1189024
Order now
Type   Material no.  
Type    Material no.   
M 100 N stock type Standard versions, in stock or available at short notice 1042609
Order now

Accessories

Wireless receiver RF Rx SW868-TCP/IP
  • Webserver based Setup
  • Communication via UDP or TCP/IP (Server or Client - Mode)
  • LEDs for indication of operating state
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • Transmitter/receiver assignment by teaching mode
Wireless receiver / repeater RF RxT SW868-USB
  • Virtual COM Port driver for Microsoft Windows, Linux, Apple Mac
  • Repeater (1-Level and 2-Level Repeater Mode)
  • Sniffer Mode
  • USB Gateway Mode
  • USB-Standard Receiver Mode
  • Different operating modes
Wireless receiver RF Rx SW868-1W 24 VAC/DC
  • 1 change-over contact, max. 6 A
  • sWave® wireless technology
  • 1 potential-free relay output
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver RF Rx SW868-2W-RS232 24 VAC/DC
  • 2 change-over contacts, max. 6 A
  • sWave® wireless technology
  • RS 232 interface
  • 2 potential-free relay outputs
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
Wireless receiver RF Rx SW868-4W 24 VAC/DC
  • 4 change-over contacts
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless receiver RF Rx SW868-4S 24 VDC - SET
  • 4 NO contacts, max. 3 A
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless receiver RF Rx SW868-4S 24 VDC Power-down-function
  • Power-down-function (saves the last signal status from the relay output, if the power supply of the receiver box is interrupted)
  • 4 NO contacts, max. 3 A
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
  • LEDs for indication of switching state
  • Transmitter/receiver assignment by teaching mode
  • 4 potential-free relay outputs
Wireless repeater RF RxT SW868-1K
  • 1-level repeater: for the signal gain between transmitter and receiver
  • LEDs for indication of operating state
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
Wireless repeater RF RxT SW868-2K
  • 2-level repeater: for the signal gain of one 1-level repeater
  • 1-level repeater: for the signal gain between transmitter and receiver
  • LEDs for indication of operating state
  • sWave® wireless technology
  • SMA plug-in connector for external antenna
Power supply 24V DC
  • Panel installation on mounting rails
  • Service-friendly spring-loaded connector system
  • Parallel connection option
  • DC OK signalling via LEDs
  • Stabilised and adjustable output voltage
RF magnet antenna 5dBi SMA plug-in connector straight 1.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 1.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF magnet antenna 2dBi SMA plug-in connector straight 2 m
  • Suitable for SW868 and EN868
  • Cable length 2 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
  • Suitable for antennae with SMA plug-in connector
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
  • Suitable for SW868 and EN868
  • RF magnet antenna with straight TNC plug-in connector
  • Cable length 3.6 m
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
  • RF SMA antenna socket with straight TNC plug-in connector
  • Suitable for RF antenna 1275629
  • Cable length 0.5 m
RF SMA antenna extension 3 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 3 m
RF SMA antenna extension 5 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 5 m
RF High gain antenna 868MHz
  • Internally grounded as lightning protection
  • 3.5 dBi gain
  • RF High gain antenna suitable for mast mounting up to max. 41 mm diametre
RF SMA N antenna extension 5 m
  • Plug on right side: straight N-type Crimp plug
  • Plug on left side: straight SMA Crimp plug
  • Cable length 5 m
  • For RF High gain antenna
  • RF SMA N antenna extension cable with straight SMA plug-in connector
RF SMA N antenna extension 10 m
  • Plug on right side: straight N-type Crimp plug
  • Plug on left side: straight SMA Crimp plug
  • Cable length 10 m
  • For RF High gain antenna
  • RF SMA N antenna extension cable with straight SMA plug-in connector
Mounting bracket for high gain antenna
  • Welded aluminium
  • Distance to wall approx. 17 cm
  • Mounting bracket for wall mounting
Field strength testing tool swView 868 MHz
  • Several functions can be selected: Scan-Mode, Repeat-Mode, Rescan-Mode, Radio-Link
  • The battery is included in the delivery
  • Only suitable for sWave® 868 MHz wireless technology
  • To measure and indicate the electrical field strength
  • Mobile field strength indicator for link range testing