RF RC M30 SW868
Wireless magnetic sensor
- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
RF GFI EN868
- Metal enclosure
- EnOcean® wireless technology
- No power supply, no wiring and pipe laying required
- Easy programming of receiver
- Multi-network capable
- Output signal can be individually configurated at the receiver
- Ex version available / Ex wireless foot switch Ex RF GFI
- Available on request with special finish in RAL colour tones
Technical data
| Standards | EN 60947-5-1; EN 61000-6-2, -6-3, EN 61000-4-2, -4-20; EN 301 489-1; EN 301 489-3; EN 300 220-1; EN 300 220-2 |
|---|---|
| Enclosure | aluminium die-cast, powder-coated |
| Cover | aluminium die-cast, powder-coated |
| Pedal | aluminium die-cast, powder-coated |
| Degree of protection | IP 67 to IEC/EN 60529 |
| Protocol | EnOcean® |
| Ambient temperature | –20 °C … +65 °C |
| Operation cycles | approx. 9000 telegrams at repetitions/h |
| Voltage supply | Electrodynamic energy generator |
| Frequency | 868.3 MHz (EU, Switzerland) |
| Transmission power | max. 10 mW |
| Data rate | 120 kbps |
| Channel bandwidth | 530 kHz |
| Wireless range | max. 200 m outside, max. 20 m inside |
| Mechanical life | > 1 million operations |
| Actuating time | min. 80 ms |
| Note | no status signal available |
Ordering details
| RF GFI EN868 | 1181367 | ||
| If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants. | |||
Accessories
Wireless receiver RF Rx EN868-TCP/IP
- Webserver based Setup
- Communication via UDP or TCP/IP (Server or Client - Mode)
- LEDs for indication of operating state
- SMA plug-in connector for external antenna
- Transmitter/receiver assignment by teaching mode
- EnOcean® wireless technology
Wireless receiver RF RxT EN868-USB
- Support of up to 128 actors and an indefinite number of transmitters
- USB 2.0 transmitter and receiver unit
- Power supply via USB interface
- EnOcean® wireless technology
- Multi-network capable
- Thermoplastic enclosure
Wireless receiver RF Rx EN868-2W 24 VAC/DC
- 2 change-over contacts, max. 6 A
- 2 potential-free relay outputs
- SMA plug-in connector for external antenna
- LEDs for indication of switching state
- Transmitter/receiver assignment by teaching mode
- EnOcean® wireless technology
Wireless receiver RF Rx EN868-2W-RS232 24 VAC/DC
- 2 change-over contacts, max. 6 A
- RS 232 interface
- 2 potential-free relay outputs
- SMA plug-in connector for external antenna
- LEDs for indication of switching state
- Transmitter/receiver assignment by teaching mode
- EnOcean® wireless technology
Wireless receiver RF Rx EN868-2W-s-RS232 24 VDC
- 2 change-over contacts, max. 6 A
- Version with Power-down function
- RS 232 interface
- 2 potential-free relay outputs
- SMA plug-in connector for external antenna
- LEDs for indication of switching state
- Transmitter/receiver assignment by teaching mode
- EnOcean® wireless technology
Wireless receiver RF Rx EN868-4W 24 VAC/DC
- 4 change-over contacts, max. 6 A
- SMA plug-in connector for external antenna
- LEDs for indication of switching state
- Transmitter/receiver assignment by teaching mode
- 4 potential-free relay outputs
- EnOcean® wireless technology
Wireless repeater RF RxT EN868-230VAC
- FME plug-in connector for external antenna
- On-wall mounting
- EnOcean® wireless technology
Power supply 24V DC
- Panel installation on mounting rails
- Service-friendly spring-loaded connector system
- Parallel connection option
- DC OK signalling via LEDs
- Stabilised and adjustable output voltage
Field strength testing tool EPM 300 EN868
- Repeater mode can be selected
- The battery is not included in the delivery, requires
an AA/LR91 lithium battery - Only suitable for EnOcean® wireless technology
- To measure and indicate the electrical field strength
- Mobile field strength indicator for link range testing
RF magnet antenna SMA plug-in connector straight 2.5 m
- Suitable for SW868, SW922 and EN868
- Cable length 2.5 m
- RF magnet antenna with straight SMA plug-in connector without ferrite core
RF magnet antenna 2dBi SMA plug-in connector straight 2 m
- Suitable for SW868 and EN868
- Cable length 2 m
- RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
- RF SMA antenna socket with straight SMA plug-in connector
- Cable length 0.5 m
- Suitable for antennae with SMA plug-in connector
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
- Suitable for SW868 and EN868
- RF magnet antenna with straight TNC plug-in connector
- Cable length 3.6 m
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
- RF SMA antenna socket with straight TNC plug-in connector
- Suitable for RF antenna 1275629
- Cable length 0.5 m
RF SMA antenna extension 3 m
- Plug on right side: straight SMA plug
- Socket on left side: straight SMA socket
- Suitable for EnOcean® as well as sWave® wireless technology
- Cable length 3 m
RF SMA antenna extension 5 m
- Plug on right side: straight SMA plug
- Socket on left side: straight SMA socket
- Suitable for EnOcean® as well as sWave® wireless technology
- Cable length 5 m
RF High gain antenna 868MHz
- Internally grounded as lightning protection
- 3.5 dBi gain
- RF High gain antenna suitable for mast mounting up to max. 41 mm diametre
RF SMA N antenna extension 5 m
- Plug on right side: straight N-type Crimp plug
- Plug on left side: straight SMA Crimp plug
- Cable length 5 m
- For RF High gain antenna
- RF SMA N antenna extension cable with straight SMA plug-in connector
RF SMA N antenna extension 10 m
- Plug on right side: straight N-type Crimp plug
- Plug on left side: straight SMA Crimp plug
- Cable length 10 m
- For RF High gain antenna
- RF SMA N antenna extension cable with straight SMA plug-in connector
Mounting bracket for high gain antenna
- Welded aluminium
- Distance to wall approx. 17 cm
- Mounting bracket for wall mounting