IS M30b 10BBBCB PNP NO 2m Extreme

Inductive sensor Extreme
Material number: 1202198
  • Cold-resistant down to -40 °C
  • High degree of protection IP 68
  • Stainless steel enclosure
  • Flush mounting
  • Long life, no mechanical wear
  • Suitable for the food processing industry
  • Insensitive to soiling
  • With LED
  • Enclosure diameter M30 x 1.5
  • With pre-wired cable, cable length 2 m
  • Attention: Please state required international approvals with your order!
Note
  • 2 mounting nuts are included in delivery
In stock
Contact

Technical data

Applied standards EN 60947-5-2
Enclosure stainless steel 1.4305
Front cap polycarbonate
Degree of protection IP 68 to IEC/EN 60529
Connection cable PUR
Cable diameter 4.6 mm
Cable cross-section 3 x 0.35 mm²
Switching elements 1 NO contact, PNP, 3-wire
Rated switching distance sn 10 mm
Correction factors Steel (Fe360) = 1; Stainless steel approx. 0.7; Brass approx. 0.5; Aluminium approx. 0.4; Copper approx. 0.4
Rated operating voltage range UB 10 … 30 VDC
Residual ripple ≤ 10 %
Switching current max. 0.2 A
Voltage drop at Ie max. 1.8 V
Current absorption < 15 mA at 24 VDC
Hysteresis approx. 10 %
Switching frequency 300 Hz
Repeatability ≤ 3 %
Protection circuit Inductive interference protection, protection against polarity reversal, short-circuit and overload proof
Ambient temperature –40 °C … +50 °C
Weight 182 g

Contact diagram

Flush mounting

Side by side mounting