Ex AZM 415

  • Ex zone 1 and 21
  • Special version up to +90 °C ambient temperature for dust Ex zone 21 available (HU)
  • Spring-to-lock or power-to-lock principle
  • Two Ex switch inserts in one enclosure
  • Problem-free opening of stressed doors by means of bell-crank system
  • High locking force 3500 N
  • Ball catch
  • Wiring compartment
  • Special version only for dust Ex zone 22 available
  • Attention: Please state required international approvals with your order!
Notes
  • The actuator is not included in the delivery of the switches
  • 1 additional cable gland M20x1.5 is included in delivery

Technical data

Applied standards EN 60947-5-1, EN ISO 14119, EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-18, EN 60079-31, EN ISO 13849-1
Enclosure aluminium die-cast, enamel finish
Cover aluminium, enamel finish
Actuator metal zinc
Switch type type 2
Coding level low coding
Tightening torque cover screws: 0.5 … 0.6 Nm
switch inserts M3 screw connection terminals: min. 0.6 Nm
Degree of protection IP 67 to IEC/EN 60529;
Ex AZM 415-TE, TEI, -FE: IP 64 to IEC/EN 60529
B10d (10 % load) 2 million
TM max. 20 years
Switch insert 2 x Ex 95
Contact material silver
Switching system slow action, positive break NC contacts
Switching elements 1 NC/1 NO contact + 1 NC/1 NO contact or 2 NC + 1 NC/1 NO contact
Connection screw connection terminals
Cable cross-section min. 0.2 mm² / AWG 24, max. 1.5 mm² / AWG 16
Cable entry 2 x M20 x 1.5 (incl. 1 cable gland)
Clamping range 7 … 12 mm
Rated impulse withstand voltage Uimp 4 kV
Rated insulation voltage Ui 250 V
Conventional thermal current Ithe 6 A
Utilisation category AC-15; DC-13
Rated operating current/voltage Ie/Ue enabling/signalling contacts: 6 A/250 VAC; 0.25 A/230 VDC;
direct-current solenoid: 0.08 A / 24 VDC ±10 %
Short-circuit protection 6 A gG/gN fuse;
direct-current solenoid: 2 A (slow blow)
Power consumption max. 12 W (0.25 s)
Ambient temperature T6: –20 °C … +40 °C;
T5: –20 °C … +55 °C
Type HU: -20 °C … +90 °C
Operation cycles max. 1200/h
Drop-out delay < 50 ms
Mechanical life > 1 million operations
Locking force Fmax 3500 N
Locking force of integrated ball catch 50 - 200 N, adjustable
Impact energy max. 7 J
Ex marking II 2G Ex demb IIC T6/T5 Gb,
II 2D Ex tb IIIC
T80 °C/T95 °C Db IP67/64
IECEx Ex demb IIC T6/T5 Gb,
Ex tb IIIC T80 °C/T95 °C Db IP67/64

Type HU:
II 2D Ex tD A21 IP67 T130 °C,
IECEx Ex tb IIIC T130 °C Db IP67

Type FE-HU:
II 2D Ex tD A21 IP64 T130 °C,
IECEx Ex tb IIIC T130 °C Db IP64
Approvals DMT 02 ATEX E 255 X
IECEx BVS 07.0018X
Type HU:
BVS 08 ATEX E 155 X
IECEx BVS 12.0013X

Stock types

The new steute product and warehouse structure

Spring-to-lock principle

Spring-to-lock principle + manual release FE

Power-to-lock principle

Ordering details

Spring-to-lock principle

Type   Material no.  
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S R stock type Standard versions, in stock or available at short notice 1169104
Type    Material no.   
Ex AZM 415 2Ö/1Ö1S R 1187771
Type    Material no.   
Ex AZM 415 1ÖS/1ÖS R-HU +90 °C -2D 1188501
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Spring-to-lock principle + manual release FE

Type   Material no.  
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S R-FE stock type Standard versions, in stock or available at short notice 1181881
Type    Material no.   
Ex AZM 415 2Ö/1Ö1S R-FE 1183280
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S R-FE-HU +90 °C -2D 1188502
Type    Material no.   
Ex AZM 415 2NC/2NO R-FE JPEx 1456119
Type    Material no.   
Ex AZM 415 3NC/1NO R-FE JPEx 1243285
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Spring-to-lock principle + emergency release TE/TEI

Type   Material no.  
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S R-TE 1182000
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S R-TEI 1181882
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Spring-to-lock principle + manual release FE + emergency release TE/TEI

Type   Material no.  
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S R-FE/TE 1181999
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S R-FE/TEI 1181998
Type    Material no.   
Ex AZM 415 2Ö/1Ö1S R-FE/TEI 1184885
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Power-to-lock principle

Type   Material no.  
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S A stock type Standard versions, in stock or available at short notice 1169106
Type    Material no.   
Ex AZM 415 2Ö/1Ö1S A 1180752
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S A-HU +90 °C -2D 1188480
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Power-to-lock principle + emergency release TE/TEI

Type   Material no.  
Type    Material no.   
Ex AZM 415 1Ö1S/1Ö1S A-TEI 1189600
Type    Material no.   
Ex AZM 415 2Ö/1Ö1S A-TEI 1283967
If you cannot find the version you require, just ask us! Our product portfolio to date has included many customised switchgear variants.

Actuators

Type   Material no.  
Type    Material no.   
Straight actuator AZM 415-B1 stock type Standard versions, in stock or available at short notice 1171889
Type   Material no.  
Type    Material no.   
Flexible actuator AZM 415-B2 stock type Standard versions, in stock or available at short notice 1171890
Type    Material no.   
Flexible actuator AZM 415-B3 stock type Standard versions, in stock or available at short notice 1171892
Type   Material no.  
Type    Material no.   
Actuator AZM 415-B4pS with grip stock type Standard versions, in stock or available at short notice 1172016
Type   Material no.  
Type    Material no.   
Actuator AZM 415-B30-01 stock type Standard versions, in stock or available at short notice 1184310
Type    Material no.   
Actuator AZM 415-B30-02 stock type Standard versions, in stock or available at short notice 1182251
Type    Material no.   
Actuator AZM 415-B30-03 stock type Standard versions, in stock or available at short notice 1172017
Type    Material no.   
Actuator AZM 415-B30-04 stock type Standard versions, in stock or available at short notice 1172018
Type    Material no.   
Actuator AZM 415-B30-05 stock type Standard versions, in stock or available at short notice 1186090
Type    Material no.   
Actuator AZM 415-B30-06 stock type Standard versions, in stock or available at short notice 1186306
Type    Material no.   
Actuator AZM 415-B30-07 stock type Standard versions, in stock or available at short notice 1172019
Type    Material no.   
Actuator AZM 415-B30-08 stock type Standard versions, in stock or available at short notice 1172020

Accessories

Mounting plate MP AZM 415-22
  • For simple mounting on profile systems, e.g. 40, 60 or 80 mm wide
  • Thickness of plate 5 mm
  • Mounting of AZM 415 or AZP 415
Mounting plate MP AZM 415-B30
  • For simple mounting on profile systems, e.g. 40, 60 or 80 mm wide
  • Thickness of plate 5 mm
  • Mounting of a door or an emergency handle
Mounting plate MP AZM 415-B4pS
  • For simple mounting on profile systems, e.g. 40, 60 or 80 mm wide
  • Thickness of plate 5 mm
  • Mounting plate MP AZM 415-B4pS: Mounting of AZM 415-B4pS
Lockout tag SZ 415-1
  • For actuator AZM 415-B30-01, -03, -06 and -08
  • To prevent inadvertent closing, e. g. during maintenance by preventing actuation of the switch
  • Suitable for mounting inside and outside the hazardous area
Lockout tag SZ 415-2
  • For actuator AZM 415-B30-02, -04, -05 and -07
  • To prevent inadvertent closing, e. g. during maintenance by preventing actuation of the switch
  • Suitable for mounting inside and outside the hazardous area
  • Shown version SZ 415-1, version SZ 415-2 mirror-image
Lockout tag SZ 415-B4pS
  • For actuator AZM 415-B4pS
  • To prevent inadvertent closing, e. g. during maintenance by preventing actuation of the switch
  • With chain to fix on actuator, length of chain 500 mm
M5 triangular key