ExM 14 D - 5m

Ex position switch
Material number: 1169551
(Material number old: 14721302)
  • Ex zone 1 and 21
  • Thermoplastic enclosure
  • Double insulated
  • Mounting details to EN 50047
  • Suitable for in-line mounting
  • With pre-wired cable, cable length 5 m
  • Actuator: Rocking lever D
  • Actuating speed max. 0.5 m/s with a vertical actuating angle of 45°
  • Wear-resistant plastic roller
  • Lever can be repositioned in 10° steps clockwise or counter-clockwise
  • Actuator can be repositioned by 180°
  • Attention: Please state required international approvals with your order!
Note
  • With metal roller available on request
In stock
Contact

Technical data

Applied standards EN 60947-5-1, EN 60079-0, EN 60079-1, EN 60079-31
Enclosure thermoplastic, glass-fibre reinforced, impact resistant, self-extinguishing UL 94 V-0
Degree of protection IP 65 to IEC/EN 60529
Contact material silver
Switching system snap action
Switching elements 1 change-over contact with single break, type C
Connection pre-wired cable H05VV-F
Cable cross-section 3 x 0.75 mm² (incl. conductor ferrules)
Cable length 5 m
Rated impulse withstand voltage Uimp 4 kV
Rated operating isolation voltage Ui 250 V
Conventional thermal current Ithe 5 A
Rated operating current/voltage Ie/Ue 5 A/250 VAC; 0.16 A/230 VDC
Utilisation category AC-15; DC-13
Short-circuit protection 5 A gG/gN fuse
Ambient temperature –20 °C … +60 °C
Mechanical life > 1 million operations
Operation cycles max. 1800/h
Repeat accuracy of switching points ± 0.1 mm
Contact opening max. 2 x 4 mm
Impact energy max. 4 J
Ex marking II 2G Ex d IIC T6 Gb,
II 2D Ex tb IIIC T80 °C Db IP65
Approvals PTB 03 ATEX 1069 X

Contact diagram

Switching diagram