Product features
Thermoplastic enclosure
Double insulated X
Mounting details to EN 50047
Suitable for in-line mounting
With pre-wired cable
Actuator: Rocking lever D
Actuating speed max. 0.5 m/s with a vertical actuating angle of 45°
Wear-resistant plastic roller
Lever can be repositioned in 10° steps clockwise or counter-clockwise
Actuator can be repositioned by 180°
Notes
With metal roller available on request
Technical data
General technical data
Applied standards
EN 60947-5-1
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Degree of protection
IP67 (IEC/EN 60529)
Contact material
silver
Switching system
snap action
Switching elements
1 NC/1 NO contact, type Za
Connection
pre-wired cable H05VV-F
Cable cross-section
4 x 0.75 mm²
Cable length
5 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
5 A
Rated operating current/voltage Ie/Ue
5 A/250 VAC; 0.16 A/230 VDC
Utilisation category
AC-15; DC-13
Short-circuit protection
5 A gG/gN fuse
Ambient temperature
–20 °C … +75 °C
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Repeat accuracy of switching points
± 0.1 mm
Contact opening
max. 2 x 4 mm
Approvals
]
Downloads
Variants / Options
The following variants / options are available on request:
- Cable entry on side
- Plug-in connector M12 x 1, 4-pole
- Gold-plated contacts
- Latching element (On-/Off principle)
- Version with UL/CSA approval
- Contact overlapping (only slow action)
Other interesting products
