Product features
Thermoplastic enclosure
Double insulated X
Suitable for in-line mounting
With pre-wired cable
Cable entry on side
Actuator: Ball plunger with collar WKU
Actuating speed max. 0.5 m/s with a vertical actuating angle of 15°
Vertical actuation or actuation from side possible
Actuator with captive stainless steel ball
Exact repeatability of switching point
Watertight collar for protection against penetration of dirt
Technical data
General technical data
Applied standards
EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Switch type
type 1
Coding level
no coding
Tightening torque
enclosure mounting screws: max. 5 Nm
Degree of protection
IP67 (IEC/EN 60529)
B10d (10 % load)
2 million
TM
max. 20 years
Contact material
silver
Switching system
slow action, positive break NC contacts A
Switching elements
2 NC/1 NO contact, type Zb
Connection
cable 6 x AWG 20
Cable cross-section
6 x 0.56 mm²
Cable length
5 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
6 A
Rated operating current/voltage Ie/Ue
6 A/250 VAC; 0.25 A/230 VDC; 4 A/24 VDC
Utilisation category
AC-15; DC-13
Short-circuit protection
6 A gG/gN fuse
Ambient temperature
–20 °C … +75 °C
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Repeat accuracy of switching points
± 0.1 mm
Contact opening
max. 2 x 3.5 mm
Approvals
]
Downloads
Variants / Options
The following variants / options are available on request:
- Cable entry on side
- Gold-plated contacts
- Plug-in connector M12 x 1, 4-pole
- Plug-in connector M12 x 1, 5-pole
Other interesting products
