ES 13 WHK 1Ö/1S - 5m

Position switch
Material number: 1045150
(Material number old: 13018901)
  • Thermoplastic enclosure
  • Double insulated
  • Suitable for in-line mounting
  • With pre-wired cable, cable length 5 m
  • Actuator: Offset roller lever with collar WHK
  • Actuating speed max. 0.5 m/s with a vertical actuating angle of 40°
  • Actuation only possible from right-hand side
  • Free movement of actuator from left-hand side
  • Metal roller
  • Watertight collar for protection against penetration of dirt
Notes
  • Actuator can be repositioned by 180° on request
  • With plastic roller available on request
Contact

Technical data

Applied standardsEN 60947-5-1
Enclosureglass-fibre reinforced, shock-proof thermoplastic, self-extinguishing UL 94 V-0
Tightening torqueenclosure mounting screws: max. 5 Nm
Degree of protectionIP 67 to IEC/EN 60529
Contact materialsilver
Switching systemslow action
Switching elements1 NC/1 NO contact, type Zb
Connectionpre-wired cable H05VV-F
Cable cross-section4 x 0.75 mm²
Rated impulse withstand voltage Uimp4 kV
Rated operating isolation voltage Ui250 V
Conventional thermal current Ithe6 A
Rated operating current/voltage Ie/Ue6 A/250 VAC; 0.25 A/230 VDC;
4 A/24 VDC
Utilisation categoryAC-15; DC-13
Short-circuit protection6 A gG/gN fuse
Ambient temperature–20 °C … +75 °C
Mechanical life> 1 million operations
Operation cyclesmax. 1800/h
Repeat accuracy of switching points± 0.1 mm
Contact openingmax. 2 x 4.5 mm
Approvals
Weight480 g

Downloads

Contact diagram

Switching diagram