Position switch with safety function
ES 13 WH 1Ö/1S - 2m
Article no.: 1045106 Old article no.: 13014909
contact usProduct features
Thermoplastic enclosure
Double insulated X
Suitable for in-line mounting
With pre-wired cable
Actuator: Roller lever with collar WH
Actuating speed max. 0.5 m/s with a vertical actuating angle
of α = 40° and β = 25°Metal roller
Watertight collar for protection against penetration of dirt
Notes
Actuation from the left should be avoided since this reduces the mechanical life of the position switch.
Actuator can be repositioned by 180° on request
With plastic roller available on request
Technical data
General technical data
Applied standards
EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Switch type
type 1
Coding level
no coding
Tightening torque
enclosure mounting screws: max. 5 Nm
Degree of protection
IP67 (IEC/EN 60529)
B10d (10 % load)
2 million
TM
max. 20 years
Contact material
silver
Switching system
slow action, positive break NC contacts A
Switching elements
1 NC/1 NO contact, type Zb
Connection
pre-wired cable H05VV-F
Cable cross-section
4 x 0.75 mm²
Cable length
2 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
6 A
Rated operating current/voltage Ie/Ue
6 A/250 VAC; 0.25 A/230 VDC; 4 A/24 VDC
Utilisation category
AC-15; DC-13
Short-circuit protection
6 A gG/gN fuse
Ambient temperature
–20 °C … +75 °C
Mechanical life
> 1 million operations
Operation cycles
max. 1800/h
Repeat accuracy of switching points
± 0.1 mm
Contact opening
max. 2 x 4.5 mm
Approvals
]
Weight
220 g
Downloads
Variants / Options
The following variants / options are available on request:
- Cable entry on side
- Gold-plated contacts
- Plug-in connector M12 x 1, 4-pole
- Plug-in connector M12 x 1, 5-pole
Other interesting products
Position switch with safety function
ES 13 WH 1Ö/1S - 2mArticle no.: 1045106 Old article no.: 13014909
contact us
