Magnetic sensor
RC M20
Metal enclosure
Long life
1 Reed contact
Actuation from front, actuation from side only with bistable contact
Switching distance up to 30 mm depending on the actuating magnet
With pre-wired cable
2 mounting nuts are included in delivery
The actuator is not included in the delivery of the switches
Technical data
General technical data
Applied standards
EN IEC 60947-5-2
Enclosure
brass, nickeled
Degree of protection
IP67 (IEC/EN 60529)
Actuating magnet
series M permanent magnet
Switching system
reed contacts
Switching elements
NO contact or change-over contact, bistable contact or bistable change-over contact
Connection
pre-wired cable H05VV-F
Cable cross-section
1S: 2 x 0.75 mm², 1W: 3 x 0.75 mm²
Cable length
1, 2 or 5 m
Switching voltage
max. 250 VAC/DC
Switching current
max. 1.5 A
Switching capacity
1S: max. 100 W, 1W: max. 50 W
Ambient temperature
–10 °C … +80 °C
Mechanical life
109 operations
Repeatability
± 0.02 mm
Vibration resistance
1S: 50 … 100 g, 1W: 10 … 50 g
Approvals
< on request
Downloads
Variants / Options
The following variants / options are available on request:
Stainless steel enclosure
Maritime certification to DNV <
