- Thermoplastic or stainless steel enclosure
- Power supply: Lithium battery
- sWave® wireless technology
The individual areas or halls in industrial production plants are often separated by industrial doors or gates (rapid action doors, rolling shutter gates, sectional doors). Doors and gates also lead to the outside areas. If people and forklifts are to move freely, this means: a convenient and efficient way of opening and, if necessary, closing the gates has to be found. Here pull wire switches have proven to be valuable, usually mounted on the ceiling of the production hall. The operator pulls a wire connected to the switch actuator and the gate opens.
When this type of switch is installed, the cost of laying the cables is often several times higher than the cost of the pull wire switch itself because several metres of cable are required. Using wireless technology can therefore significantly reduce the price. The switch needs to be robust and easy to install.
The opening and closing of industrial doors and gates was one of the first application fields for steute wireless switchgear, and it is still one of the most frequently realised applications today. The RF 95 wireless pull wire switch is the most common choice. The actuating part has a grommet to which the pull wire can be attached.
The wireless pull wire switch is easy to install and operate and can be moved to a different location as required.
RF 95 WH/90Wireless pull-wire switches
RF 95 WH/90°