Wireless repeater RF RxT SW915-1K

Wireless repeater
Material number: 1253729
  • sWave® wireless technology
  • LEDs for indication of operating state
  • 1-level repeater: for the signal gain between transmitter and receiver
  • SMA reverse plug-in connector for external antenna
Contact

Technical data

StandardsEN 60947-5-1;
EN 61000-6-2, -6-3, -4-2, -4-20,
EN 61000-4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
MountingDIN rail mounting
Connectionterminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Degree of protectionIP 20 to IEC/EN 60529
Rated operating current Ie24 VDC: max. 0.02 A;
24 VAC: max. 0.03 A
Rated operating voltage Ue24 VAC/DC -15 % … +10 %
Utilisation categoryAC-15; DC-13
Ui250 VAC
Uimp2.5 kV
Frequency915 MHz (USA, Canada and Mexico)
Displaygreen LED: operating state
orange LED: signalisation of telegram
Degree of pollution2 to IEC/EN 60664-1
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
External antennaalways required for optimum wireless range
ApprovalsUSA: FCC - XK5-RFRXSW915;
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886

Arrangement of receiver and switch antenna

Optimum    Possible       Unsuitable

mounting    mounting     mounting


Note

Magnetic base antennae must be mounted on a
metal plate of min. 250 x 250 mm size.


Accessories

RF magnet antenna 5dBi R-SMA plug-in connector straight 3.6 m
  • Suitable for SW915 and SW917
  • Cable length 3.6 m
  • RF magnet antenna with straight R-SMA plug-in connector without ferrite core
Power supply 24V DC
  • Panel installation on mounting rails
  • Service-friendly spring-loaded connector system
  • Parallel connection option
  • DC OK signalling via LEDs
  • Stabilised and adjustable output voltage