Wireless receiver RF Rx SW915-4S 24 VDC - SET

Wireless receiver
Material number: 1373187
In stock

Features/Options

  • sWave® wireless technology
  • 4 potential-free relay outputs
  • 4 NO contacts, max. 3 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA reverse plug-in connector for external antenna
Note

Product image

 

Dimensions

Downloads

» Data sheet
PDF | 21.05.2018

» FCC-Certificate
PDF | 349 KB | 16.04.2018

» IC-Certificate
PDF | 406 KB | 27.07.2017

» ift-Certificate (Mexico)
PDF | 1 MB | 16.02.2018

» Mounting and wiring instructions
PDF | 2 MB | 07.06.2017

» STEP-File
ZIP | 1 MB | 20.03.2017

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20, -4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Number of channels4
MountingDIN rail mounting
Connectionscrew terminals 0.14 mm² - 2,5 mm², stripping length 8 mm
Degree of protectionIP 20 to IEC/EN 60529
Inputs4 wireless channels, max. 40 transmitters
Outputs4 NO contacts (relay)
Rated operating current Ie24 VDC: max. 0.1 A
Rated operating voltage Ue24 VDC -15 % … +10 %
Ie/Ue of output contacts3 A / 250 VAC; 3 A / 24 VDC
Utilisation categoryAC-15; DC-13
Ui250 VAC
Uimp2.5 kV
Frequency915 MHz (USA, Canada, Mexico and Australia)
Displaygreen LED: operating state,
orange LED: switching conditions
Operation cyclesapprox. 12000 telegrams at repetitions/h
Degree of pollution2 to IEC/EN 60664-1
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
External antennaalways required for optimum wireless range
NoteInductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry. Switching contacts are not suitable for capacitive loads.
ApprovalsUSA: FCC: XK5-RFRXSW915;
Canada: IC: 5158A-RFRXSW915
Mexico: IFT/223/UCS/DG-AUSE/6773/2017

Arrangement of receiver and switch antenna

Optimum    Possible       Unsuitable

mounting    mounting     mounting


Note

Magnetic base antennae must be mounted on a
metal plate of min. 250 x 250 mm size.