Wireless receiver RF Rx SW868-4W 24 VAC/DC

Wireless receiver
Material number: 1188654
(Material number old: 90590019)
  • sWave® wireless technology
  • 4 potential-free relay outputs
  • 4 change-over contacts
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna
In stock
Contact

Technical data

StandardsEN 60947-5-1;
EN 61000-6-2, -6-3, -4-2, -4-20,
EN 61000-4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Number of channels4
MountingDIN rail mounting
Connectionterminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Degree of protectionIP 20 to IEC/EN 60529
Inputs4 wireless channels, max. 10 transmitters per channel
Outputs4 change-over contacts (relays)
Rated operating current Ie24 VDC: max. 0.1 A;
24 VAC: max. 0.25 A
Rated operating voltage Ue24 VAC/DC -15 % … +10 %
Ie/Ue of output contacts6 A/250 VAC; 2 A/24 VDC
Utilisation categoryAC-15; DC-13
Ui250 VAC
Uimp2.5 kV
Frequency868.3 MHz (EU, Switzerland)
Displaygreen LED: operating state,
orange LED: switching conditions
Operation cyclesapprox. 12000 telegrams at repetitions/h
Degree of pollution2 to IEC/EN 60664-1
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
External antennaalways required for optimum wireless range
NoteInductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Weight152 g

Arrangement of receiver and switch antenna

Optimum    Possible       Unsuitable

mounting    mounting     mounting


Note

Magnetic base antennae must be mounted on a
metal plate of min. 250 x 250 mm size.


Accessories

RF magnet antenna 5dBi SMA plug-in connector straight 1.5 m
  • Suitable for SW868, SW922 and EN868
  • Cable length 1.5 m
  • RF magnet antenna with straight SMA plug-in connector without ferrite core
RF SMA antenna socket 0.5 m
  • RF SMA antenna socket with straight SMA plug-in connector
  • Cable length 0.5 m
  • Suitable for antennae with SMA plug-in connector
RF Magnet antenna 5dBi TNC plug-in connector IP 65 3.6 m
  • Suitable for SW868 and EN868
  • RF magnet antenna with straight TNC plug-in connector
  • Cable length 3.6 m
RF SMA antenna socket 0.5 m with TNC plug-in connector IP 65
  • RF SMA antenna socket with straight TNC plug-in connector
  • Suitable for RF antenna 1275629
  • Cable length 0.5 m
RF SMA antenna extension 3 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 3 m
RF SMA antenna extension 5 m
  • Plug on right side: straight SMA plug
  • Socket on left side: straight SMA socket
  • Suitable for EnOcean® as well as sWave® wireless technology
  • Cable length 5 m
RF High gain antenna 868MHz
  • Internally grounded as lightning protection
  • 3.5 dBi gain
  • RF High gain antenna suitable for mast mounting up to max. 41 mm diametre
RF SMA N antenna extension 5 m
  • Plug on right side: straight N-type Crimp plug
  • Plug on left side: straight SMA Crimp plug
  • Cable length 5 m
  • For RF High gain antenna
  • RF SMA N antenna extension cable with straight SMA plug-in connector
RF SMA N antenna extension 10 m
  • Plug on right side: straight N-type Crimp plug
  • Plug on left side: straight SMA Crimp plug
  • Cable length 10 m
  • For RF High gain antenna
  • RF SMA N antenna extension cable with straight SMA plug-in connector
Mounting bracket for high gain antenna
  • Welded aluminium
  • Distance to wall approx. 17 cm
  • Mounting bracket for wall mounting
Power supply 24V DC
  • Panel installation on mounting rails
  • Service-friendly spring-loaded connector system
  • Parallel connection option
  • DC OK signalling via LEDs
  • Stabilised and adjustable output voltage