Wireless universal transmitter
RF 96 ST Vcc extern
Thermoplastic enclosure
Mounting details to EN 50047
sWave® wireless technology (SW868/SW915/SW917/SW922)
External power supply via M12 plug-in connector
Can be combined with 3-wire PNP sensors 24 VDC or external sensors or NO contacts with gold contacts
Power supply: 24 VDC
Easy programming of receiver
Output signal can be individually configured at the receiver
Available with "LBT - Listen before Talk" software (necessary in conjunction with potential interference)
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP67 (IEC/EN 60529)
Voltage source
24 VDC
Connection
plug-in connector M12 x 1, 4-pole
Ambient temperature
–20 °C … +65 °C
Switching frequency
max. 5 Hz
Rated operating voltage range UB
10 … 30 VDC Pin 1 and Pin 3 plug-in connector M12
Rated insulation voltage Ui
75 VDC
Rated impulse withstand voltage Uimp
0.5 kV
Rated operating current Ie
2.5 mA
Standby current
15 µA (if sensor is not connected)
Voltage drop Ue - Ua
1.5 V
Load current
max. 100 mA
Switching points
> 5 VDC (E1, E2)
Wireless range
SW868/915/917:
max. 450 m outdoors,
max. 40 m indoors
SW922:
max. 150 m outdoors,
max. 20 m indoors
Actuating time
min. 80 ms
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002
Downloads
Variants / Options
The following variants / options are available on request:
- LBT - Listen before Talk software (necessary in conjunction with potential interference)
