Inductive sensor

IS M30


  • Metal enclosure

  • M30 x 1.5 thread

  • Flush mounting

  • Long life, no mechanical wear

  • Insensitive to soiling

  • With LED

  • With pre-wired cable or plug-in connector

Technical data

Applied standards

EN 60947-5-2

Enclosure

brass, nickeled

Front cap

polycarbonate

Degree of protection

IP67 (IEC/EN 60529)

Connection

cable PVC (Ø max. 4.6 mm) 3 x 0.35 mm² or plug-in connector M12 x 1

Switching elements

1 NO contact, PNP, 3-wire

Rated switching distance sn

10 mm

Correction factors

Steel (Fe360) = 1; Stainless steel approx. 0.7; Brass approx. 0.5; Aluminium approx. 0.4; Copper approx. 0.4

Rated operating voltage range UB

10 … 30 VDC

Residual ripple

≤ 10 %

Switching current

max. 0.2 A

Voltage drop at Ie

max. 1.8 V

Current absorption

< 15 mA at 24 VDC

Hysteresis

approx. 10 %

Switching frequency

300 Hz

Repeatability

≤ 3 %

Protection circuit

Inductive interference protection, protection against polarity reversal, short-circuit and overload proof

LED display

lights up yellow on actuation

Ambient temperature

–25 °C … +85 °C

Downloads

EU Declaration of Conformity – IS M8 / IS M12 / IS M18 / IS M30

German, English

PDF 962 KB 26.09.2023
Please go to the relevant product pages for additional downloads.

Other interesting products

RF IS M30 nb-ST

Wireless version

Wireless

Ex IS M30

Alternative version with explosion protection

Ex

IS M30 Extreme

Temperature resistant version with higher degree of protection

IS M30 full metal Extreme

Version with full metal housing made of stainless steel