Bezdrátový přijímač RF Rx EN868-4

Features/Options

  • EnOcean-standard
  • 4-channel: potential-free relay outputs
  • 4 change-over contacts,
    max. 10 A
  • Transmitter/receiver assignment by teaching mode
  • LEDs for indication of switching state
  • SMA plug-in connector for external antenna

Note
The antenna must be mounted on a metal plate of min. 250 x 250 mm size.

Product image

 

Technical Data

Standards EN 60947-5-1; EN 61000-6-2;
EN 61000-6-3; EN 60068-2-6;
EN 60068-2-27; EN 301 489-1;
EN 301 489-3; EN 300 220-2
Number of channels 4
Mounting DIN rail mounting
Connection terminals with CAGE CLAMP
WAGO Series 236:
0.08 ... 2.5 mm²
AWG 28–14
(incl. conductror ferrules)
Degree of protection IP 20 per IEC/EN 60529
Inputs 4 radio channels, max. 10 transmitters
per channel
Outputs 4 change-over contacts (relay)
Rated operating
current Ie		 max. 0.25A AC; 0.1A DC
Rated operating
voltage Ue		 24 V AC/DC -15% ... +10%
Ie/Ue of output contacts 6A / 250 VAC; 2A / 24 VDC
Utilisation category AC-15; DC-13
Ui 250 VAC
Uimp 2.5 kV
Frequency 868.3 MHz
Display green LED: operating voltage,
yellow LED: switching conditions
Switching frequency approx. 9000 telegrams at repetitions/h
Degree of pollution 2 per DIN VDE 0110
Ambient temperature 0°C ... +55°C
Storage and transport temperature -25°C ... +85°C
Vibration resistance NO 20g, NC 5g
Shock resistance max. 100g
External antenna always required for optimum sensing range
Note Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Approvals